HP ProCurve 6600 runs “ProVision” network operating system. ProVision command syntaxes are pretty much similar to Cisco IOS commands.
Following are commands to enable SSH on a ProCurve 6600 series –
First create local user account on the switch; command is –
#password manager user-name admin; this will prompt to enter password
Generate crypto keys for SSH server; command is –
#crypto key generate ssh
Enable SSH service; command is –
#ip ssh
To check SSH service status, enter the following command –
#show ip ssh
To restrict access to SSH (or local services on the switch), configure authorised manager IP address; command is –
#ip authorized-managers IP_Address
That’s all.